AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Replacement for Boca Raton Homeowners
When a furnace starts short-cycling, tripping the breaker, or leaving cold spots in rooms it used to heat, replacement usually costs less than another season of repairs. We handle furnace replacement in Boca Raton for homeowners who want one contractor for both heating and cooling, and we work on the actual system in your home rather than one brand we’re tied to. Our technicians have up to experience and are familiar with nine major HVAC brands, from Trane and Lennox to Goodman and Rheem. If your heat has already quit, call (855) 552-3403. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. For a full system changeout, we schedule your install date after a load check and a written fixed price, so nothing gets promised before the numbers are on paper.
What Our Furnace Replacement Service Includes
Removal and Disposal of the Old Furnace
Every replacement starts with pulling the existing unit and getting it out of your home without damage to floors, doorways, or the return plenum. We disconnect the gas line, the flue, and the electrical feed, then haul the old furnace away as part of the job. If your current system is a Goodman or Rheem that’s been limping along for years, this is the step where you finally stop paying to keep it alive.

Load Check and Equipment Sizing
An undersized furnace runs constantly and never catches up; an oversized one blasts heat, then shuts off before the house evens out. We measure the home’s square footage, insulation, window exposure, and duct layout to match capacity to the actual building. This is the step most quick-swap installs skip, and it’s why some replacement furnaces never feel right afterward. Our technicians size the equipment before anyone orders it.

New Furnace Installation and Connections
Once the unit is sized, we set it, reconnect the gas supply, venting, electrical, and thermostat, and verify combustion and airflow before we leave. We work on equipment from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so the recommendation comes from what fits your ductwork and budget rather than what a dealer incentive pushes. Installation is scheduled, not rushed, because a furnace replacement is load-calculated work that can’t be safely improvised.

Duct and Airflow Verification
A new furnace pushes into the same ducts the old one used, and if those ducts are undersized or leaking, the new unit underperforms. We check static pressure and airflow at the supply and return so the equipment isn’t fighting a restriction it can’t overcome. When we find a problem, we tell you what it is and what it costs to correct before the install, not after.
Post-Install Testing and Walkthrough
We run the system through a full heating cycle and confirm temperature rise, gas pressure, and ignition sequence match the manufacturer’s spec. Then we walk you through the thermostat settings and filter schedule so the new furnace starts out on the right foot. If you’ve been dealing with a furnace that never heated evenly, this is where you find out whether the replacement actually fixed it.
Permit and Inspection Coordination
Most cities require a permit for a furnace replacement, so ask your city’s building department what applies to your address before work begins. We help you understand what the inspection will cover and make sure the install is done to code so it passes the first time. That coordination is part of the job, not an add-on you chase down yourself.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Brands We Service for Furnace Replacement
We work on Trane and Lennox equipment often enough to know exactly where those systems wear out first, and we can tell you whether a repair makes sense or whether replacement is the smarter spend. Trane and Lennox furnaces tend to hold up well when they’re maintained, but their heat exchangers and control boards are the parts that decide the conversation. We also handle Goodman and Rheem, the value-tier systems many Boca Raton homeowners already have in place, and we’re honest about when a Goodman is worth replacing and when a repair still buys you years. Whether it’s your Carrier AC or your Goodman furnace, we know the equipment.
Our brand-agnostic approach matters at replacement time. We’re not a single-brand dealer, so the recommendation you get is based on your home’s size, your ductwork, and your budget, not on which manufacturer pays a spiff. We’re factory-familiar with nine major brands, including York, Daikin, Bryant, and American Standard, and we diagnose by the system in your home. Whether you have Trane, Lennox, or any other make, we can help.
Signs You Need Furnace Replacement Right Now
- A cracked or rusted heat exchanger. This is the one finding that ends the conversation about repair. A compromised heat exchanger can let combustion gases into your living space, and no reputable technician will patch one back into service. If we find it, we tell you plainly and lay out replacement options.
- Rising gas bills with no change in usage. A furnace that’s lost efficiency burns more fuel to produce the same heat. When your bills climb two or three months running and the thermostat settings haven’t moved, the equipment is telling you something. Replacement often pays back faster than another round of parts.
- Frequent repairs stacking up. One repair a year is normal wear. Three in two seasons, on a system past its useful life, means you’re funding a furnace that’s on its way out anyway. We’ll show you the math instead of just pushing a new unit.
- Uneven heat and cold rooms. If the back bedroom never warms up while the front of the house cooks, the furnace may be undersized or the ducts may be choked. Sometimes that’s a duct fix. Sometimes it’s a sizing problem only replacement solves, and we check both before recommending anything.
- Yellow flame or unusual smell. A healthy furnace burns a steady blue flame. A yellow, flickering flame or a lingering odor can point to incomplete combustion, which is a safety issue, not a comfort one. Turn the system off and call a trained professional rather than investigating it yourself.
Our Furnace Replacement Process – Step by Step
- 1
Diagnostic visit and honest assessment. We inspect the furnace, check the heat exchanger, measure temperature rise, and look at the ductwork and venting. If repair still makes sense, we tell you that and quote it. Replacement only comes up when the equipment genuinely justifies it.
- 2
Load calculation and written fixed price. We measure the home and size the new furnace to the actual building, then hand you a written fixed price before any equipment is ordered. No surprise line items later, and no pressure to upgrade beyond what your home needs.
- 3
Scheduling and permit work. You pick an install date that works, and we handle permit coordination with your city so the inspection is covered. Furnace replacement in Boca Raton gets scheduled this way because the work is load-calculated and ordered, not improvised on the spot.
- 4
Installation day. We remove the old unit, set the new one, and reconnect gas, venting, electrical, and thermostat. Every connection gets tested for leaks and proper draft before the system runs a full heating cycle.
- 5
Testing and walkthrough. We verify combustion, temperature rise, and airflow against spec, then walk you through the thermostat and filter schedule. If anything needs an adjustment after the install, that’s on us to sort out.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Boca Raton?
A furnace replacement in Boca Raton typically runs $3,500 – $7,500 depending on the size of the system, the efficiency tier you choose, and whether duct work or venting needs attention. A straight swap of a standard-efficiency furnace in a modest home tends to land near the lower end, while a high-efficiency unit with venting changes, a larger capacity for a bigger house, or permit and inspection work pushes toward the top of the range. These are estimated ranges, and the written estimate sets the final price.
Several things move the number. Capacity is the biggest driver, since a furnace sized for a 1,500-square-foot home costs less than one sized for a larger layout. Efficiency tier matters too, and premium equipment from Trane or Lennox costs more than value-tier Goodman or Rheem units of the same capacity. Venting changes, duct repairs, and permit fees all factor in, and so does whether the old unit comes out cleanly or fights the whole way.
To avoid overpaying, get a written fixed price before anything is ordered and make sure it lists equipment, labor, permit, and disposal separately. Be wary of a quote built only on square footage without a load check, because that’s how undersized and oversized furnaces get sold. A free estimate from us includes the load calculation, the equipment options, and a clear breakdown of what’s included, so you’re comparing real numbers rather than a headline figure.
Furnace Replacement Near Boca Raton – Our Service Area
We handle furnace replacement across Boca Raton and the surrounding communities, including Boynton Beach, Lake Clarke Shores, Lantana, Lake Worth Beach, Greenacres, Palm Springs, Wellington, Westgate, and Palm Beach. Scheduling is set by the written estimate and equipment lead time, and we coordinate the install date with you directly. Fast dispatch runs from 7am to 7pm, Sunday through Friday, so if your furnace fails, call and we’ll book the assessment. If you’re outside Boca Raton, we’ll confirm your address and schedule accordingly.
Serving Boca Raton, FL – Our Local Coverage Area
We serve Boca Raton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Furnace Replacement in Boca Raton
A furnace replacement means removing your existing heating unit and installing a new one sized to your home, including reconnecting gas, venting, electrical, and thermostat controls. It’s different from a repair, which fixes a specific part on equipment that still has useful life left. Replacement typically makes sense when the heat exchanger is compromised, when repairs keep stacking up, or when the unit is past its service life and losing efficiency. We assess all of that before recommending replacement.
Most furnace replacements take a single day once the equipment is on site, though larger systems or jobs that need venting changes can run into a second day. The timeline starts with a diagnostic visit and load calculation, then moves to ordering equipment and scheduling the install with your city’s permit requirements in mind. We give you the expected schedule in writing before we start, so you know what to plan around. Call (855) 552-3403 to get the assessment scheduled.
A furnace replacement in Boca Raton typically runs $3,500 – $7,500, with the final price depending on system size, efficiency tier, venting or duct work, and permit costs. These are estimated ranges, and the written estimate sets the final price. A free estimate includes the load calculation and a clear breakdown of equipment, labor, and disposal, so you can compare real numbers. Call (855) 552-3403 for an exact quote – estimates are free.
Yes. We work on Trane and Lennox equipment along with Carrier, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We’re familiar with where each brand tends to wear out and how to size a replacement match to your existing ductwork. Whether you have Trane or any other make, we can help.
We can often schedule same-day assessments, and we answer the phone 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and a call outside dispatch hours gets booked into the next opening. Furnace replacement itself is scheduled after the load calculation and equipment order, so we set a firm install date rather than promising same-day installation. Call (855) 552-3403 for an exact quote – estimates are free.
Warranty coverage depends on the manufacturer and the equipment tier you choose, and it’s confirmed in writing with your estimate. Premium brands and value-tier brands sometimes carry different warranty terms, so we walk you through what applies before you decide. We don’t quote warranty length until it’s confirmed in the paperwork. Ask about coverage when we’re out for the estimate.
Clear access to the furnace and the path to it, and move anything fragile away from the work area. Plan for the heat to be off during the install, which is typically most of a day. If your city requires a permit, we handle the coordination, but you may need to be available for the inspection. We’ll tell you exactly what to expect before the install date.
Schedule Your Furnace Replacement Service in Boca Raton Today
If your furnace is on its last leg, get a written fixed price before you spend another season on repairs. Call (855) 552-3403 for a free estimate on furnace replacement in Boca Raton. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers both heating and cooling, and the estimate comes with no obligation.
Written by the team at Tidewater AC Repair.